Redshopb2b

  • Tascam ML-32D Analog Dante converter 32 kanaler
  • Tascam ML-32D Analog Dante converter 32 kanaler
  • Tascam ML-32D Analog Dante converter 32 kanaler
  • Tascam ML-32D Analog Dante converter 32 kanaler
  • Tascam ML-32D Analog Dante converter 32 kanaler
  • Tascam ML-32D Analog Dante converter 32 kanaler
Tascam
Artikelnummer: TAS-ML32D

Tascam ML-32D Analog Dante converter 32 kanaler

Levering: 1-3 dage

Kort beskrivning

Analogue-Dante-Analogue converter for 16 (ML-16D) or 32 (ML-32D) line-level audio channels Dante interface allows up to 16/32 audio channels to be transferred over an Ethernet network Two LAN connectors for primary and secondary networks provide redundancy Flexible routing with ”Dante Controller” software AES67 is supported to allow connection with Ravenna and other compatible audio network technologies Up to 96 kHz sampling rate and 24 bit resolution Indicators for operation status and current sample rate Overload indicators for analogue input signals Signal indicators for analogue input and output signals Five different reference levels available to adapt to virtually any application in consumer, professional or broadcast environments (selectable via rear-side switches) 25-pin D-sub connectors for balanced line inputs/outputs (AES59-2012:TASCAM pin assignment) Euro Block breakout box can be used for fixed installation (BO-32DE) XLR breakout boxes can be used for live music or studio applications (BO-16DX/IN, BO-16DX/OUT) 19-inch rack-mountable chassis (1U) Ratings Audio resolution 44.1/48/88.2/96 kHz, 16/24 bit Analogue audio inputs Connectors D-sub 25-pin Locking screws No. 4-40 UNC (inch type) Nominal input level +4 dBu, +6 dBu (only when maximum input level is +15 dBu) Maximum input level +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches) Input impedance =10 kO Analogue audio outputs Connectors D-sub 25-pin Locking screws No. 4-40 UNC (inch type) Nominal output level +4 dBu, +6 dBu (only when maximum output level is +15 dBu) Maximum output level +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches) Output impedance =200 O Applicable load impedance =2 kO Network inputs/outputs Dante PRIMARY/SECONDARY RJ-45 connectors Transmission protocol Dante Network standard Gigabit Ethernet, 1000BASE-T (IEEE 802.3ab) Cable requirements Cat 5e or better STP cables Audio performance ANALOG IN to DANTE OUT Frequency response 20 Hz – 20 kHz, +0.1 dB / –0.5 dB (–16 dBFS input, 44.1/48 kHz sampling frequency, JEITA) 20 Hz – 40 kHz, +0.1 dB / –0.5 dB (–16 dBFS input, 88.2/96 kHz sampling frequency, JEITA) Distortion (THD+N) =0.001 % (–1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) S/N ratio =113 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) Crosstalk =115 dB (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) DANTE IN to ANALOG OUT Frequency response 20 Hz – 20 kHz, +0.1 dB / –0.5 dB (–16 dBFS input, 44.1/48 kHz sampling frequency, JEITA) 20 Hz – 40 kHz, +0.1 dB / –1.0 dB (–16 dBFS input, 88.2/96 kHz sampling frequency, JEITA) Distortion (THD+N) =0.001 % (–1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) S/N ratio =110 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) Crosstalk =115 dB (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) Power supply and other specifications Power supply AC 100–240 V, 50/60 Hz Power consumption ML-32D: 22 W ML-16D: 14 W Dimensions (W × H × D) 483 mm × 45 mm × 304 mm Weight ML-32D: 3.5 kg ML-16D: 3.3 kg Operating temperature range 0–40 °CTascam ML-32D Analog Dante Converter Tascam ML-32D är en kompakt analog Analog-Dante Analog-omvandlare av hög kvalitet för att transportera 16 eller 32 analoga ljudkanaler över Dante-nätverk i båda riktningarna. 25-polig D-sub-kontakt för att spara utrymme kan användas med Tascam breakout paneler; ingång och balanserad utgång, analog ljudsignal på radnivå. 2 Ethernet-kontakt (Dante Primary / Secondary) för redundant nätverksläge i 2 separata nätverk. Driftsstatusindikator och aktuella samplingsfrekvens och överbelastnings-LED för varje ingångs- och signallampa för varje ingång och utgång. Med omkopplaren på baksidan kan du ställa in önskad maximal ingångs- / utgångsnivå. Alla andra inställningar, t.ex. Provtagningsfrekvens, kanalrutning eller fördröjning kan göras på den fritt tillgängliga "Dante Controller" -applikationen. Dante är en nätverksteknik från Audinate, som erbjuder högpresterande ljudfördelning över standard IP-nätverk. Den stöder hundratals samtidiga kanaler av okomprimerat ljud med extremt låg latens och exakt synkronisering.
LABEL_GO_TO_FULL_DESCRIPTION
Incl. moms SEK 20.372,50

Detaljbeskrivning

Analogue-Dante-Analogue converter for 16 (ML-16D) or 32 (ML-32D) line-level audio channels Dante interface allows up to 16/32 audio channels to be transferred over an Ethernet network Two LAN connectors for primary and secondary networks provide redundancy Flexible routing with ”Dante Controller” software AES67 is supported to allow connection with Ravenna and other compatible audio network technologies Up to 96 kHz sampling rate and 24 bit resolution Indicators for operation status and current sample rate Overload indicators for analogue input signals Signal indicators for analogue input and output signals Five different reference levels available to adapt to virtually any application in consumer, professional or broadcast environments (selectable via rear-side switches) 25-pin D-sub connectors for balanced line inputs/outputs (AES59-2012:TASCAM pin assignment) Euro Block breakout box can be used for fixed installation (BO-32DE) XLR breakout boxes can be used for live music or studio applications (BO-16DX/IN, BO-16DX/OUT) 19-inch rack-mountable chassis (1U) Ratings Audio resolution 44.1/48/88.2/96 kHz, 16/24 bit Analogue audio inputs Connectors D-sub 25-pin Locking screws No. 4-40 UNC (inch type) Nominal input level +4 dBu, +6 dBu (only when maximum input level is +15 dBu) Maximum input level +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches) Input impedance =10 kO Analogue audio outputs Connectors D-sub 25-pin Locking screws No. 4-40 UNC (inch type) Nominal output level +4 dBu, +6 dBu (only when maximum output level is +15 dBu) Maximum output level +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches) Output impedance =200 O Applicable load impedance =2 kO Network inputs/outputs Dante PRIMARY/SECONDARY RJ-45 connectors Transmission protocol Dante Network standard Gigabit Ethernet, 1000BASE-T (IEEE 802.3ab) Cable requirements Cat 5e or better STP cables Audio performance ANALOG IN to DANTE OUT Frequency response 20 Hz – 20 kHz, +0.1 dB / –0.5 dB (–16 dBFS input, 44.1/48 kHz sampling frequency, JEITA) 20 Hz – 40 kHz, +0.1 dB / –0.5 dB (–16 dBFS input, 88.2/96 kHz sampling frequency, JEITA) Distortion (THD+N) =0.001 % (–1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) S/N ratio =113 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) Crosstalk =115 dB (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) DANTE IN to ANALOG OUT Frequency response 20 Hz – 20 kHz, +0.1 dB / –0.5 dB (–16 dBFS input, 44.1/48 kHz sampling frequency, JEITA) 20 Hz – 40 kHz, +0.1 dB / –1.0 dB (–16 dBFS input, 88.2/96 kHz sampling frequency, JEITA) Distortion (THD+N) =0.001 % (–1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) S/N ratio =110 dB (44.1/48/88.2/96 kHz sampling frequency, JEITA) Crosstalk =115 dB (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) Power supply and other specifications Power supply AC 100–240 V, 50/60 Hz Power consumption ML-32D: 22 W ML-16D: 14 W Dimensions (W × H × D) 483 mm × 45 mm × 304 mm Weight ML-32D: 3.5 kg ML-16D: 3.3 kg Operating temperature range 0–40 °CTascam ML-32D Analog Dante Converter Tascam ML-32D är en kompakt analog Analog-Dante Analog-omvandlare av hög kvalitet för att transportera 16 eller 32 analoga ljudkanaler över Dante-nätverk i båda riktningarna. 25-polig D-sub-kontakt för att spara utrymme kan användas med Tascam breakout paneler; ingång och balanserad utgång, analog ljudsignal på radnivå. 2 Ethernet-kontakt (Dante Primary / Secondary) för redundant nätverksläge i 2 separata nätverk. Driftsstatusindikator och aktuella samplingsfrekvens och överbelastnings-LED för varje ingångs- och signallampa för varje ingång och utgång. Med omkopplaren på baksidan kan du ställa in önskad maximal ingångs- / utgångsnivå. Alla andra inställningar, t.ex. Provtagningsfrekvens, kanalrutning eller fördröjning kan göras på den fritt tillgängliga "Dante Controller" -applikationen. Dante är en nätverksteknik från Audinate, som erbjuder högpresterande ljudfördelning över standard IP-nätverk. Den stöder hundratals samtidiga kanaler av okomprimerat ljud med extremt låg latens och exakt synkronisering.